HydroTec MSW-Exclusive (made only in Illinois) Point-Of-Entry (POE) Mobile-Soft-Water(TM) Conditioner ½ Cubic Foot Size (16,000 grains nominal capacity) Conditions water of Calcium, Magnesium, Iron, Lead, Radium and other Heavy Metals found in well and some municipal water. Benefits: It regenerates without electricity, It is mobile, It is Easy to use, and, It is easy to regenerate. MSW0918-M-16S: A single 9 inch diameter by 18 inch conditioner with garden hose in – out connections. The tank will be loaded with 1/2 cubic foot of highly charged high capacity water softening resin. This unit is capable of treating up to 5 gallons per minute of supply water with a 10 grain Total Hardness load to 0 soft conditions on a continuous base up to 1600 gallons of conditioned water. We are supplying all new equipment and components with a one year limited warranty on materials. The system is complete. Equipment description and related shipping information is as follows: A. The softener vessel is an 9 inch diameter fiberglass reinforced plastic pressure vessels designed for 150 psig operating pressure, B. The inlet connection is a Nylon (lead free & NSF 61) male hose connection, C. The outlet is a Nylon (lead free & NSF61) male hose connection, D. Each male hose connection will be capped for mobility E. One half (1/2) cubic feet of C-108 cation resin 8% cross link styrene softening resin is loaded into the tank, and, F. The conditioner is placed into a shipping carton. Please note as of January 2014 the USEPA (Section 1417 (a)(1) of the SDWA) has mandated that all connections that have a possibility of being used in a drinking water application where humans could drink the water must be lead free. To that end we have replaced our brass fittings with robust nylon fittings.